INSIDE ATOMIC GOGGLES

Live Fit frames are built with a flexible grid construction and feature adaptive tri-layer foam that instantly molds to the contours of your face – creating an individual fit right out of the box.

Quick Click Lens is a mechanical system allowing you to change lenses in seconds, featured on our Revent Q goggles: when conditions change you click out one lens, click in a new one and you’re done.

Fusion Double Lens (FDL) is the next-generation for double lens construction (optical class 1): it uses lamination instead of connecting the cylindrical lenses with an additional foam layer. This means an up to 20% larger field of vision compared to a classic double lens construction. And because the two lenses are laminated together, there’s no double light refractions, no reflections and no decline in optics due to changes in atmospheric pressure at altitude. There’s no fogging or scratching either – with anti-fog treatment on the inner lens (AC) and anti-scratch coating on the outer lens (PC).

HD (High Definition) technology has all the advantages of Stereo lenses (nine layers of high-end mirror coating to increase protection from glare and reduce eye fatigue), giving crystal clear visibility in all light conditions. In addition, crystals in the lens divide white light into its six spectral colors. The lens then enhances the sensitive ones, so you see everything in high-definition contrast and get a greater sense of depth, making these the best performing lenses in the widest range of light conditions.

To switch the lens, in one hand firmly hold below the nose of the frame, and with the other gently pull the top plastic off the to separate the frame from the lens. Next, gently pull the lens from the bottom section of the frame with the cloth. Make sure to avoid touching the inside of the lens, as this is where the Anti-Fog coating sits. To attach a new lens to the frame, start by inserting the hooks located on the opposing ends of the lens into the little groves on each the side of the frame, after this continue to insert the lens on the top and bottom groves of the frame. Afterwards, wipe the front of the lens with the Microfiber cloth to get rid of any finger prints. 

Our goggles ensure great comfort and vision through a dedicated climate control system. Hot air escapes through integrated ventilation channels at the top and bottom, preventing moisture in the goggles.