Helmets
INSIDE ATOMIC HELMETS
AMID
AMID stands for Atomic Multi-directional Impact Deflector and is our own development. It’s a revolutionary dual-density foam system which is fixed to the helmet’s core and free to move in all directions. This means better protection against impacts from all directions – as the foam cushions energy right at impact, then continues to deflect energy away from the head through its movement. By absorbing energy through the whole impact, it provides a new level of protection, whether the impact is high speed or low speed, direct or angled.
40% higher impact protection with AMID
AMID is a revolutionary dual-density foam system that provides up to 40% higher impact protection than industry safety standards.
Holo Core
Crumple zones are designed to absorb the energy from the impact during a collision by controlled deformation. The driver stays mostly unhurt.
The impact absorption is 30% higher than CE requires.
HELMET CONSTRUCTION – LAYER BY LAYER
It’s all the features and every detail of our helmets that make them really stand out. Here you can see the different layers – providing instant supreme protection, individual fit, and ultimate comfort.
CONSTRUCTION TYPES
ABS HARD SHELL CONSTRUCTION
Hard-shell helmets are constructed primarily from ABS plastic. This outer shell gets bonded to the EPS core for a two-piece construction that provides high durability and ultimate high-impact protection.
IN-MOLD CONSTRUCTION
In-mold helmets are constructed directly in the mold. The EPS foam is molded into the PC shell, which results in a very safe and light construction.
HYBRID SHELL CONSTRUCTION
Hybrid shells combine the best of both worlds in helmet construction. The upper part is ABS hard-shell for extra stability and protection. The lower part is in-mold to keep the weight down.
INVERTED HYBRID CONSTRUCTION
Atomic's Inverted Hybrid Construction turns hybrid helmet build upside down: ABS hard-shell and Holo Core around the sides and front of the helmet provide structural stability and significantly improve impact protection, while the upper in-mold part keeps the weight down.
Fit and Lining
360° FIT SYSTEM
This progressive 360° Fit System enables you to fine-tune the helmet not only to your head size – but also your headshape. For 100% personalized comfort.
GRÖSSENVERSTELLBAR
All our all-mountain helmets can be adjusted by a dial at the back of the head. This lets you manually fine-tune your fit, including height adjustment of the reel.
Live Fit + 360° Fit system
The combination of Live Fit and our new 360° Fit System offers you the best adjustment possible – for a fit that’s fine-tuned to your head size and molded to your headshape.
3M™ Thinsulate x-static lining
This new high-performance lining provides unparalleled anti-microbial and anti-odor properties.
Ear Fit System
The Ear Fit System is a special ear pad closing system we use for our Junior helmets that works with a draw cord, keeping the ears warm and protected.
Ventilation
AIRCON VENTING
Aircon is our most advanced cooling system yet. The Holo Core offers wider and more air channels through each layer of the helmet which gives hot air room to escape and adjustable vents actively suck heat away from the head.
ACTIVE DUAL ZONE VENTING
Active Venting allows skiers to actively control the air flow around their head, with separate sliders over the vents in the front and back of the helmet.
PASSIVE VENTING
A built-in system without adjustment. Basic but effective, it creates a constant air flow over your head all day long, keeping you cool without making you freeze.
Helmet-Goggle Interface
All our goggles have frames to fit our helmets. And all our helmets are shaped to work with the goggles. That said, there are combinations that just work perfectly – in terms of fit, ventilation, and – of course – looks.
