INSIDE ATOMIC SKIWEAR
Here at Atomic we don’t just make ski gear, we use it too: we spend lots of time on the snow so we design our skiwear to function for us – and you, too. Atomic skiwear features GORE-TEX® to keep you dry and GORE® WINDSTOPPER® for optimum wind protection and breathability.
TECHNICAL FABRICS WITH MEMBRANES
GORE-TEX® products are durably waterproof and windproof combined with optimized breathability. Our 3-layer construction with tricot or flannel backing bonds the GORE-TEX® membrane to both the outer fabric and the inner lining. The benefit: no movement between the layers, which means less wear and tear, and enhanced durability.
3L Stretch GORE® WINDSTOPPER® Garments with WINDSTOPPER® fabric are totally windproof yet extremely breathable. The WINDSTOPPER® membrane is an ultra thin protective layer which is laminated to a lightweight textile layer. A durable outer fabric treatment provides protection of water repellency. The fabric's stretch gives great freedom of movement.
OUTER FABRICS AND INSULATION
A lightweight, coated windproof and water-resistant fabric with 1000mm water column.
A stretchy fabric that lets vapor escape, retains warmth, wicks away sweat and dries quickly.
An insulation made from synthetic non-woven polyester that's durable, resilient and extra warm without making your garment look bulky.
PRIMALOFT SILVER DOWN BLEND
Ultra-fine PrimaLoft Silver fiber is blended with white duck down for amazing warmth and moisture resistance.
TITANIUM PREMIUM DOWN
With 800 fill power and 95% premium white goose down, this is a highly efficient natural insulation that offers an unbeatable warmth to weight ratio.
Our skiwear is made to work for every skier, with specific fits tailored to various playgrounds.
Comfortable Ski Fit
A fit that allows extra layering, with an extended back length for warmth as well as articulated sleeves and knees for great freedom of movement and comfort. Featured in our Piste and All Mountain line.
Comfortable Stretch Fit
A stretchy fit that is neither too tight nor too wide, with articulated knees for great freedom of movement and comfort. Featured in our Backcountry line.
PERFORMANCE-ENHANCING BODY MAPPING CONSTRUCTION
Materials are placed specifically where they deliver the greatest benefit, with 4-way stretch patterning on all panels and thin, breathable fabrics in typical perspiration zones.
ELASTANE STRETCH INSERTS
Underarm panels made from highly elastic Elastane provide comfort and great freedom of movement.
The Storm Hood comes with a higher collar for optimized wind protection.
ADJUSTABLE STORM HOOD
Delivering exceptional coverage without sacrificing peripheral vision, this Storm Hood is adjustable with a drawcord.
OPTIMIZED COLLAR CONSTRUCTION
A higher collar with a fleece laminated chin guard for comfort and protection.
ADJUSTABLE SLEEVE TABS
Sleeve tabs come with die cut VELCRO® that won't tear off other materials.
LEG HEM ADJUSTMENT
Creates a secure fit over a range of boot volumes and collar heights.
CORDURA REINFORCEMENTS ON INSTEP
An abrasian-resistant reinforcement that protects against damage from ski edges, boots and crampons.
A 360° waistband adjustment system with die cut VELCRO® tabs that won't tear off other materials.
HIGHER WAISTBAND PLUS
A higher waistband with fleece lining provides comfort and warmth.
Removable and fully adjustable front and back attached suspenders prevent pants from riding up or falling down.
SKI PASS POCKET
A ski pass pocket on the lower sleeve for easy ticket scanning.
BACKPACK COMPATIBLE HAND POCKETS
Hand pockets are strategically placed to ensure easy access when wearing a backpack.
INTERNAL AND EXTERNAL CHEST POCKETS
Internal and external chest pockets offer storage for smaller essentials like your cell phone, wallet etc.
A thin and durable powder skirt made from ripstop fabric prevents snow from entering the jacket – it's so light you can hardly feel it.
UNDER ARM VENTILATION
Under arm vents with a 2-way zipper allow for adjustable breathability.
Thigh vents with a 2-way zipper allow for adjustable breathability.
BOTTOM HEM ADJUSTMENT
The bottom hem is adjustable to your desired length.
A minimal pack size and low weight, ideal for taking with you.
GORE-TEX® CARE INSTRUCTIONS
GORE-TEX® garments are easy to care for. Routine care will ensure excellent performance and extend their life. Be sure to follow the manufacturer’s care instructions. Before laundering, zip the front closure, pockets and pit zips completely, and fasten all flaps and straps.
Machine wash on a warm cycle (105º F/40º C) using a small amount of liquid detergent. Rinse twice, minimize spinning to reduce creasing. Do not use powder detergents or any products that contain fabric softeners, conditioners, stain removers or bleach as they will affect garment performance. Do not wash with heavily soiled clothing.
Line dry your garment, or tumble dry it on a warm, gentle cycle. Once it is dry, tumble dry your garment for 20 minutes to reactivate the durable water-repellent (DWR) treatment on the outer fabric.
If unable to tumble dry, iron the dry garment on gentle setting (warm, no steam) by placing a towel or cloth between the garment and the iron. This will help reactivate DWR treatment on your garment’s outer fabric.
Gore recommends home laundering. If professional dry cleaning is necessary, request that the cleaner use clear distilled hydrocarbon solvent for rinsing. After dry cleaning, the garment’s outer fabric will need a new water-repellent treatment. Follow your garment manufacturer’s instructions.
Do not use chlorine bleach.
When the factory applied treatment can no longer be reactivated, apply a new water-repellent treatment (available at local outdoor retailers) to the garment’s outer fabric.